Emergency Furnace Repair Calgary 24 Hour

Emergency Furnace Repair Calgary 24 Hour

We offer emergency furnace repair Calgary 24 hours furnace repair service. If your furnace has stopped working, we’re here to help. This Emergency furnace repair service is offered after hours and on weekends. We fix all types of furnace models and makes.

Service call includes:

  • Dispatched call with same-day service
  • Equipment diagnostics
  • Labor

*Note: Parts are not included

 

Call Us for Your Emergency Furnace Repair

403. 531.6181

Troubleshooting Info for Your Furnace

Use this chart to identify a wide variety of conditions that may be preventing your furnace from working at peak performance, and basic solutions to try before calling a furnace company to have your furnace serviced.
NOTE: The servicing of furnaces by not-qualified personnel can lead to costly problems, health risks and fire hazards. Our technicians have the training, test equipment and facilities to properly service your furnace.

Problem Possible cause Solution
Furnace won’t run
1. No power 1. Check for blown fuses or tripped
circuit breakers at main entrance
panel, at separate entrance panel,
and on or in furnace; restore circuit
2. Switch off 2. Turn on separate power switch
on or near furnace
3. Motor overload 3. Wait 30 minutes; press reset
button. Repeat if necessary
4. Pilot light out 4. Relight pilot ONLY if you know how to do so and are comfortable with doing so.
Otherwise, call a professional.
5. No gas 5. Make sure gas valve to furnace is
fully open
Not enough heat
1. Thermostat set
too low
1. Raise thermostat setting 5°
2. Filter dirty. 2. Clean or replace filter
3. Blower clogged 3. Clean blow assembly ONLY if you know how to do so and are comfortable with doing so. Otherwise, call a professional.
4. Air vents closed
or blocked
4. Make sure all ducts are open;
make sure they are not blocked
by rugs, drapes or furniture.
5. System out of balance 5. Call a professional
6. Blower belt loose
or broken
6. Call a professional.
7. Burner dirty 7. Call a professional.
Pilot won’t light 1. Pilot opening blocked. 1. Clean pilot opening ONLY if
you know how to do so and are comfortable with doing so. Otherwise, call a professional
2. No gas 2. Make sure pilot light button
is fully depressed; make sure
gas valve to furnace is fully open
Pilot won’t
stay lit
1. Loose or faulty
thermocouple
1. Tighten thermocouple nut
slightly, if no results, call a professional to replace thermocouple
2. Pilot flame set
too low
2. Adjust pilot so flame is
about 2 inches long
3. Electric pilot faulty 3. Call a professional
Furnace turns
on and off
repeatedly
1. Filter dirty2. Motor and/or blower
needs lubrication
1. Clean or replace filter2. If motor and blower have
oil ports, lubricate
Blower won’t
stop running
1. Blower control
set wrong
1. Reset thermostat from
ON to AUTO
2. Limit switch set wrong 2. Reset limit switch
for stop-start cycling
3. Limit control
needs adjustment
3. Call a professional
Furnace noisy 1. Access panels loose 1. Mount and fasten access
panels correctly ONLY if
you know how to do so and are comfortable with doing so. Otherwise, call a professional
2. Belts sticking, worn,
or damaged
2. Spray squeaking drive belts
with belt dressing; call a professional to replace worn
or damaged belts.
3. Blower belts
too loose or too tight.
3. Adjust belt ONLY if
you know how to do so and are comfortable with doing so. Otherwise, call a professional
4. Motor and/or
blower needs
lubrication
4. If motor and blower
have oil ports, lubricate
5. Burner dirty
5. Call a professional

Chart Courtesy of Dan Ramsey’s Fix-It Club

 

Call Us to Book a Professional Furnace Repair

403. 531.6181